0 Item

This EPT one-piece clamping shaft collar includes a quick-clamping design and is constructed of anodized aluminum. This is a one-piece clamping shaft collar for applications requiring a far more uniform holding electrical power and larger axial load capability than setscrew collars. It is easier to take away and reposition than setscrew collars and is effective on both hard and soft shafts. This collar has a quick-clamping design for making frequent adjustments by using a lever handle rather than tools. It is well suited for applications that require quick alterations and method tuning such as for example adjusting lead rails or locating components. It is made of metal with an anodized complete that escalates the metal’s have on and corrosion resistant properties and increases its area hardness, holding electric power, and visual aspect. This collar posseses an aluminum lever manage with a gold anodized finish for speedy installation and release of the collar. The functioning temperatures because of this collar range from -40 to 93 degrees C (-40 to 200 degrees F). This shaft collar is suited to use in a variety of applications, including in the car industry to situate components in automobile ability steering assemblies, the making industry to locate parts on a conveyor belt program, and the hobby craft industry to hold tires on axles in remote control vehicles, among others.
Shaft collars are ring-shaped devices mostly used to secure components onto shafts. In addition they serve as locators, mechanical stops, and spacers between additional components. The two simple types of shaft collars happen to be clamping (or split) collars, which come in one- or two-piece models, and setscrew collars. In both types, one or more screws contain the collars in place on the shaft. In setscrew collars, screws happen to be tightened through the collar until they press straight against the shaft, and in clamping collars, screws will be tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars should be set up by sliding the collar over the finish Penjepit poros 1of the shaft, while two-piece clamping collars distinct into two halves and can be installed between parts on the shaft. Shaft collars are manufactured from a variety of materials including zinc-plated steel, metal, nylon, and neoprene. Found in nearly every type of machinery and sector, shaft collars are being used in applications which include gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical products, and paper and steel mill equipment, amongst others.
EPT manufactures shaft collars, rigid couplings, and zero-backlash motion control couplings including beam couplings, bellows couplings, Oldham couplings, curved jaw couplings, and miniature disc couplings. The business, founded in 1937, and headquartered in Marlborough, MA, complies with Restriction of Hazardous Chemicals (RoHS) and Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH) standards.

One-piece clamping shaft collar for applications requiring a far more uniform holding vitality and larger axial load ability than setscrew collars
Desain kerah penjepit cepat untuk sering melakukan penyesuaian tanpa alat
Aluminum with an anodized end for greater corrosion resistance, wear resistance, and surface area hardness than plain aluminum
Includes an aluminum lever deal with with a precious metal anodized finish for quick installation and relieve of the collar
Suhu pengoperasian berkisar antara -40 hingga 93 derajat C (-40 hingga 200 derajat F)
Among the simplest and consequently most Penjepit poros cina overlooked components in the power transmission industry is the shaft collar. Nevertheless, the importance of the shaft collar is definitely demonstrated through the widespread usage of these ingredients. Shaft collars are available in virtually any kind of equipment. They are used by themselves for different applications, including mechanical stops, locating elements and bearing faces, and are frequently accessories to various other components to create assemblies for many types of power tranny equipment which include motors and gearboxes.