0 Item

gearbox pemotong putar

gearbox pemotong putar
RC-twenty Sequence
Spesifikasi Teknis
Torque: 1,750 – three,267 lb.-in.
198 - 369 Nm.
Ratios: 1:2.5, one:2.eighty three
Segel: Pegas Bibir Tiga Dimuat
Bantalan: Bola Alur Dalam
Tutup Minyak: 16 ons. (.empat puluh tujuh L)
Bodyweight: 34 lbs. (fifteen.four kg)
Aplikasi
Pemotong Rotari Mesin Pemotong Finishing
Rotary Slasher Toppers
RC-27 Urutan
RC-thirty Collection
Spesifikasi
Torque: 2,800 – four,667 lb.-in.
316 - 527 Nm.
Ratios: one:1.forty seven, one:1.seventy one, 1:1.93
Segel: Pegas Bibir Tiga Dimuat
Bantalan: Bola Alur Dalam
Tutup Minyak: 23 oz. (68 L)
Excess weight: 51 lbs. (23.1 kg)
program
Pemotong Putar Pemotong Akhir
Rotary Slasher Toppers
Seri RC-51
Persyaratan
Torsi: 2,800 - 4,667 lb.-in.
316 - 527 Nm.
Ratios: 1:one.47, one:one.seventy one, 1:one.ninety three
Segel: Pegas Bibir Tiga Dimuat
Bantalan: Tapered Roller / Deep Groove Ball
Tutup Minyak: 27 oz. (80 L)
Bodyweight: fifty six lbs. (25.4 kg)
Aplikasi
Pemotong Putar Rotary Slashers
Gears: Available with possibly straight bevel or spiral bevel gearing.
Electricity: Hp & Torque based on AGMA method for continuous obligation plus a services or load course aspect.
Shafting: Numerous dimensional, metallurgical, and heat-handle alternatives available.
Bearings: Geardrives obtainable with a variety of bearing life possibilities.
Lubrication: Drives available with different lubes dependent on functioning attributes

Replacement Rotary Cutter gearbox, 40hp rated, one-3/eight”-six spline enter shaft, 1.fifty seven” X twelve tapered spline output shaft and one:1.forty seven velocity up ratio. These gearboxes have a sq. housing configuration and are identical in mounting and ratio to the spherical configuration gearboxes. These are original gear gearboxes on the IM402, IM502 and IM602 collection rotary cutters which highlighted slip clutch PTO shafts. This gearbox will not suit the IM400, IM500 and IM60 designs as they have a gearbox pemotong putar 1clean input shaft! If your gearbox has a twelve spline output shaft and a one-three/eight” – six spline input shaft this gearbox will operate. Bolt pattern is 4-3/four” on heart gap to hole and 6-3/four” heart to center of bolt hole on diagonal. The mounting holes sort a square bolt sample.

gearbox pemotong putar

Discover more regarding gearbox pemotong putar di website kami.