0 Item

High power roller chains with improved fatigue strength and influence strength
HI-PWR-S roller chains are enhanced in fatigue power and influence strength without modifying the dimension within the pin length direction of normal roller chains. Plates are enlarged, along with the machining accuracy and assembling accuracy of components are improved. The roller chains hold substantial transmission efficiency for applications from lower to high speeds and therefore are impressive enough to stand up to long-term use.
Pekerjaan yang direkomendasikan
?In contrast to normal roller chains, HI-PWR-S roller chains are higher in maximum kilowatt rating by about 30 High power roller chains 1percent inside a medium to lower speed selection. They exhibit great capability in spots wherever significant shock loads are applied, drive units for regular start/stop, and in addition in substantial speed applications.

?Mesin teknik sipil seperti skid steer, trencher, truk, crane, truk pengaduk, forklift dan unit penggerak untuk konveyor, elevator, stacker, dan sebagainya.
Ragam rantai
Generally, pick your chain with reference to “Designing of Chain Transmission” and in addition to your tables of “Drive Performance” and “Dimensions” of HI-PWR-S form roller chains.Nevertheless, only to get a particular case of minimal speed and less shock, “Low-speed selection” is also applicable.
sprocket
HI-PWR-S Roller chains and ANSI typical chains are the same in simple dimensions. Use ANSI normal sprockets.
Menghubungkan hyperlink dan hyperlink offset
Use H connecting back links for HI-PWR-S. In an H connecting link, the pins are lightly interference-fitted together with the connecting plate. To the connection in between the connecting plate as well as the connecting pins, spring pins are applied rather than cotter pins to get a common roller chain.
Pelat tengah dari tautan situs web penghubung H untuk rantai multipleks memiliki bantalan yang ditekan.
HI-PWR-S roller chains don’t have any offset hyperlink. Use an even quantity of links.
Never ever make the holes of your connecting plate more substantial and in no way make the pins thinner to facilitate the work for fitting the pins in to the connecting plate, because otherwise the fatigue strength might be lowered.